Notice:  As with anything downloaded from the internet, you must take steps to check each file for contamination by virus. CompuDoc take every precaution, as does our web site host, but even the most secure sites have been hacked. We recommend that you install and maintain a good anti-virus package, some of which are AVG, McAfee, Norton and Sophos.

CompuDoc 8

Existing CompuDoc 7 users may prefer to download the CompuDoc 8 Pre-registration Utility before they install CompuDoc 8. This utility allows you to pay for the CompuDoc 8 upgrade, and obtain the registration codes. before CompuDoc 8 is installed.

The migration from CompuDoc 7 to CompuDoc 8 will take at least a half hour, and in some cases two hours. CompuDoc 7 must be closed on all machines during the upgrade, which means that the migration will probably take place outside normal working hours. Therefore, the CompuDoc accounts department will not be available to issue the codes immediately.

This facility allows you to have the CompuDoc 8 registration codes available before you start.

CompuDoc 8 files

CompuDoc 8 installation file, for new users and users of version 7.

The CompuDoc 8 installer. Use this file for upgrades from earlier versions of CompuDoc, and new installations.
Note: See the Pre-registration utility below.
File name: SetupCompuDoc8.exe (~46 Mb).
Last updated: 1st November 2011

CompuDoc 8.0.1 upgrade file, for existing users of version 8.

The CompuDoc 8.0.1 upgrade installer. Use this file for upgrades from an installed CompuDoc version 8.
Note: Do not use for any other purpose.
File name: Setup8xTo801.exe (~16 Mb).
Last updated: 7th March 2011

CompuDoc 8 MBS table update - requires CompuDoc 8.0.1 to be installed, loads latest available MBS update table and runs the MBS table update programme

The MBS table update application and data table. The data table contains all the November 2011 MBS and DVA fees.
File name: SetupVer8MBSUpdate.exe (2.2 Mb).
Last updated: 28th October 2011
Users of older versions will need to upgrade to version 8.0.1 for this programme to work.

CompuDoc 8 Pre-registration Utility

A utility that allows you obtain the version 8 codes before the installation takes place. This allows the update payment ($699 for version 7 users) to be processed before the migration from version 7 takes place.
File name:  SetupPreReg8.exe  (1.46 Mb).
Last updated: 26th March 2010.

Note: The latest version 7 is 7.5.0.630 as of 10th August, 2010

This page contains links to files that are available for download. Please read the Contents section below, to learn which files you need or would prefer. Then click (once) on the link (underlined and coloured text) to take you to an individual description of each of the files. Having found the file, click (once) on the appropriate link beside "File name:" to begin downloading that file to your computer.

You will then be asked if you wish to save the file to your hard disk, or open the file. Please save the file to your hard disk, noting the folder name, so you can find the file after downloading. Once the file is downloaded, use Windows Explorer to run the file, usually by double-clicking on the file.

A definition of the file formats is available at the bottom of this page. All file sizes are approximate.

Contents

Some of these files are self extracting compressed files that contain other files that may or may not be .exe files.  To extract file from a self extracting file, simply double-click on the file - the installation programme 'knows' where the files to be replaced are located.

Version 7 files

CompuDoc 7.5 upgrade file, for users whose current version is between 7.0 and 7.4, inclusive.

The latest upgrade file for version 7.5, including the data conversion utility that is necessary to upgrade version 7.0 .. 7.4 data to 7.5. Do not download unless version 7.0 .. 7.4 has previously been installed. If your present version is 6.0 or earlier this will not work - you will need to download the complete installation, at the bottom of this section.
File name: 7xTo75Setup.EXE (40 Mb).
Last updated: 2nd September 2009.

CompuDoc 7.5 programme file, for users whose current version is 7.5.

The latest programme file for version 7.5. Do not download unless version 7.5 has previously been installed. If your present version is 7.0 to 7.4 this will not work - you will need to download the upgrade file, above this section. If your version is 6.0 or earlier you will need to download the complete installation, at the bottom of this section.
File name: 75ExeOnly.EXE (6.95 Mb).
Last updated: 10th September 2009.

CompuDoc 7 Fee table update - requires CompuDoc 7.3 or greater to be installed, loads latest available fee update table and runs the FeeTableUpdate75.exe programme

The Fee table update application and data table. The data table contains the November 2010 MBS fees.
File name: FeeTblUpSetup.EXE (1.56 Mb).
Last updated: 1st July 2011 - version 6 or version 7 fee table is not being updated after July 2011.
Users of older versions will need to upgrade to version 7 for this programme to work.

HIC Online checklist

If you have the necessary certificates and tokens for HIC Online from HIC and HeSA, use this checklist to advise CompuDoc that you are ready for installation. Requires Adobe Reader to view & print.
File name: HICChecklist.pdf (12 Kb).
Last updated: 4th November 2004.

Medicare PKI Certificate Wizard - installs the latest Medicare Online PKI Certificate Manager, and CertWizard

Includes the latest PKI Certificate Manager, and runs CertWizard, a Wizard that assists in the setting up of the Certificate Manager.
File name: CertWizardSetup.EXE (1.8 Mb).
Last updated: 23rd August 2007.

CompuDoc 7.5 complete installation file, for users who do not have CompuDoc 7 installed.

The complete installation file for version 7.5, only necessary if you do not have any version 7. If you have 7.0 to 7.5 then the 7.5 upgrade file at the top of the page is smaller and will serve the same purpose.
File name: CDoc75.EXE (168 Mb).
Last updated: 7th February 2008.

 

Version 7 utilities

CompuDocOpLock.exe. has no installation programme - it may be run from anywhere.

CompuDocOpLock.exe is a Windows NT only (NT 4 & Windows 2000) utility that makes numerous changes to your Windows Registry, for the purpose of allowing the data tables to be written to disk immediately, rather than at the Operating System's discretion. This is NOT a self extracting file. This may be used with CompuDoc 5.0 or greater.

File name:  CompuDocOpLock.exe (203 Kb). Estimated download time with 56k modem - 4 to 6 minutes.
Last updated: 23rd June 2000.

ExtDataSetup.EXE installs the version 7 external data table import\export programme

This setup programme contains ExtData75.exe, a utility to import records from external sources, into CompuDoc 7. The most common use for this utility is the importation of patient records from a Patients.OUT file
File name:  ExtDataSetup.exe (1,050 Kb). Estimated download time with 56k modem ~20 minutes.
Last updated: 27th November 2011.

DataUpgr7Setup.EXE installs the 7 data Importer programme

This file is usually only used once, to import data tables from earlier versions of CompuDoc into the version 7 format data tables.
File name:  DataUpgr7Setup.EXE (1.0 Mb). Estimated download time with 56k modem ~29 minutes.
Last updated: 15th February 2005.

DataRestruct71Setup.EXE installs the 7.1 data table restructure programme

This setup programme contains DataUpgr71.exe, a utility to upgrade data table structures from version 7.0 versions of CompuDoc into the version 7.1 format. It does not import any data, it merely changes your existing version 7.0 table structures.
File name:  DataRestruct71Setup.EXE(694 Kb). Estimated download time with 56k modem ~20 minutes.
Last updated: 25th November 2004.

TableRepair71Setup.EXE installs the version 7 data table repair programme

This setup programme contains TableRepair.exe, a utility to repair corrupt data tables and indices in CompuDoc 7. Table corruption usually occurs when computers lose power, or their network connection.
File name:  TableRepair71Setup.EXE(677 Kb). Estimated download time with 56k modem ~20 minutes.
Last updated: 27th December 2004.

 

File Formats

.exe    Windows executable programme.
.txt      Uncompressed text file.

Back to Top